About ST
Products
Applications
Support
Buy
News & Events
ST Worldwide
Contact Us
my.ST Login
Datasheets
|
Transistors
|
IGBTs
|
IGBTs, 600V
N-channel 600V - 50A - Max247 - Very fast PowerMESH" IGBT
Datasheet
Format:
(292 kb)
or
(10 kb)
Last Updated: 25/06/2010
Pages: 14
Related Information
"Product information: ""V"" Series IGBT"
IGBTs Product Page
STGY40NC60VD PSpice Model (.lib)
Related Press Releases
STMicroelectronics Introduces PowerMESH IGBTs for Switched-Mode Power Supplies
Raw Ascii Text
- (
Hide
)
(Unformatted textual content of the document used by search engines)
STGY40NC60VD
N-channel 600V - 50A - Max247 Ver y fast PowerMESHTM IGBT
Features
Type STGY40NC60VD
VCES 600V
IC VCE(sat) (max)@25C @100C < 2.5V 50A
High current capability High frequency operation up to 50kHz Low CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Max247
1 2 3
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "V" identifies a family optimized for very high frequency applications. Figure 1. Internal schematic diagram
Applications
High frequency inverters, UPS SMPS and PFC in both hard switch and resonant topologies Motor drivers
Table 1.
Device summary
Marking GY40NC60VD Package Max247 Packaging Tube
Order code STGY40NC60VD
July 2007
Rev 9
1/14
www.st.com 14
Contents
STGY40NC 60VD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . .... 7
3 4 5
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
STGY40NC60VD
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICL (2) IF VGE PTOT Tj
Absolute maximum ratings
Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Turn-off SOA minimum current Diode RMS forward current at TC = 25C Gate-emitter voltage Total dissipation at TC = 25C Operating junction temperature Value 600 80 50 200 30 20 260 -55 to 150 Unit V A A A A V W C
1. Calculated according to the iterative formula:
T T J ---- A --C I ( T ) = -----------------------------------------M------X----------------------------------------------CC R ×V (T , I ) THJ C CESAT(MAX) C C
2. Pulse width limited by max junction temperature
Table 2.
Symbol Rthj-case Rthj-case Rthj-amb TL
Thermal resistance
Parameter Thermal resistance junction-case max IGBT Thermal resistance junction-case max diode Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose (1.6mm from case, for 10 sec) typ. Value 0.48 1.5 50 300 Unit C/W C/W C/W C
3/14
Electrical characteristics
STGY40NC60VD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs
Static
Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 1.9 1.7 3.75 2.5 Typ. Max. Unit V V V V A mA nA S
Collector-emitter saturation VGE= 15V, IC= 40A voltage VGE= 15V, IC=40A,Tc=125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250A VCE= Max rating,TC= 25C VCE= Max rating,TC= 125C VGE= 20V, VCE= 0 VCE = 15V, IC=20A
5.75 10 1 100 20
Table 4.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 40A, VGE = 15V, Figure 17 Min. Typ. 4550 350 105 214 30 96 Max. Unit pF pF pF nC nC nC
4/14
STGY40NC60VD
Electrical characteristics
Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(Voff) tf tr(Voff) td(Voff) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 40A , RG= 3.3 VGE= 15V, Figure 18, Figure 16 VCC = 390V, IC = 40A , RG= 3.3 VGE= 15V, Tj = 125C Figure 18, Figure 16 VCC = 390V, IC = 40A RG= 3.3 VGE= 15V, , Figure 18, Figure 16 VCC = 390V, IC = 40A , RG= 3.3 VGE= 15V, Tj = 125C Figure 18, Figure 16 Min. Typ. 43 17 2060 42 19 1900 25 140 45 60 170 77 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 6.
Symbol Eon Eoff(1) Ets Eon Eoff(1) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 40A , RG= 3.3 VGE= 15V, Figure 16 VCC = 390V, IC = 40A RG= 3.3 VGE= 15V, , Tj = 125C Figure 16 Min. Typ. 330 720 1050 640 1400 2040 Max. 450 970 1420 Unit J J J J J J
1. Turn-off losses include also the tail of the collector current
5/14
Electrical characteristics
STGY40NC60VD
Table 7.
Symbol Vf t rr Qrr I rr m t rr Qrr I rr m
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 20A If = 20A, Tj = 125C If = 20A,VR = 40V, Tj = 25C, di/dt = 100 A/s Figure 19 If = 40A,VR = 50V, Tj =125C, di/dt = 100A/s Figure 19 Min. Typ. 1.5 1 44 66 3 88 237 5.4 Max. 2.2 Unit V V ns nC A ns nC A
6/14
STGY40NC60VD
Electrical characteristics
2.1
Figure 1.
Electrical characteristics (curves)
Output characteristics Figure 2. Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
Capacitance variations
7/14
Electrical characteristics Figure 7. Normalized gate threshold voltage vs temperature Figure 8.
STGY40NC60VD Collector-emitter on voltage vs collector current
Figure 9.
Normalized breakdown voltage vs temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current
8/14
STGY40NC60VD Figure 13. Turn-off SOA
Electrical characteristics Figure 14. Thermal impedance
Figure 15. Emitter-collector diode characteristics
9/14
Test circuit
STGY40NC 60VD
3
Test circuit
Figure 17. Gate charge test circuit
Figure 16. Test circuit for inductive load switching
Figure 18. Switching waveform
Figure 19. Diode recovery time waveform
10/14
STGY40NC60VD
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/14
Package mechanical data
STGY40NC60VD
Max247 MECHANICAL DATA
mm MIN. A A1 b b1 b2 c D e E L L1 4.70 2.20 1.00 2.00 3.00 0.40 19.70 5.35 15.30 14.20 3.70 TYP. MAX. 5.30 2.60 1.40 2.40 3.40 0.80 20.30 5.55 15.90 15.20 4.30 MIN. inch TYP. MAX.
DIM.
P025Q
12/14
STGY40NC60VD
Revision history
5
Revision history
Table 8.
Date 07-Jun-2004 14-Jul-2004 13-Jul-2007
Revision history
Revision 7 8 9 Initial electronic version. Figure 15 has been update The document has been reformatted, corrected error on Table 4 Changes
13/14
STGY40NC60VD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14
Document Number: 9714
Untitled Document
Further Information
Contact
Online Support
(Registration Required)
(292 kb)
